Ford 2010 Edge страница 128 Скачать руководство пользователя

Страница: 128 / 328

Note:

Do not do the following:

•

Place heavy objects on the seat

•

Operate the seat heater if water or any other liquid is spilled on the
seat. Allow the seat to dry thoroughly.

The heated seats will only function when the ignition is in the on
position.

To operate the heated seats:

•

Press the control located on the
climate control system panel once
to activate high heat.

•

Press twice to activate low heat.

•

Press a third time to deactivate.

The indicator light on the control will illuminate when activated. For low
heat, one light will be lit; for high heat, both lights will be lit.

REAR SEATS

Head restraints

Lift the head restraint so that it is located directly or as close as possible
behind your head.

The outboard head restraints can be
moved up by pulling up on the head
restraint.

Seating and Safety Restraints

128

2010 Edge

(edg)

Owners Guide

(own2002)

, 1st Printing

USA

(fus)

Содержание 2010 Edge









































































































































































































































































































































Результаты поиска

Содержание 2010 Edge

Отзывы:

Похожие инструкции для 2010 Edge

Бренды по названию

Популярные бренды

Ford 2010 Edge, Руководство пользователя

Результаты поиска

Содержание 2010 Edge

Отзывы:

Похожие инструкции для 2010 Edge

Бренды по названию

Популярные бренды