Ford 2010 Edge Скачать руководство пользователя

Страница: 148 / 328

WARNING:

Never place your arm over the airbag module as a

deploying airbag can result in serious arm fractures or other

injuries.

Steps you can take to properly position yourself away from the airbag:

•

Move your seat to the rear as far as you can while still reaching the
pedals comfortably.

•

Recline the seat slightly (one or two degrees) from the upright
position.

WARNING:

Do not put anything on or over the airbag module.

Placing objects on or over the airbag inflation area may cause

those objects to be propelled by the airbag into your face and torso
causing serious injury.

WARNING:

Do not attempt to service, repair, or modify the

airbag supplemental restraint system (SRS) or its fuses. See your

authorized dealer.

WARNING:

Modifying or adding equipment to the front end of

the vehicle (including frame, bumper, front end body structure

and tow hooks) may affect the performance of the airbag system,
increasing the risk of injury. Do not modify the front end of the
vehicle.

Seating and Safety Restraints

148

2010 Edge

(edg)

Owners Guide

(own2002)

, 1st Printing

USA

(fus)

Содержание 2010 Edge









































































































































































































































































































































Результаты поиска

Содержание 2010 Edge

Отзывы:

Похожие инструкции для 2010 Edge

Бренды по названию

Популярные бренды

Ford 2010 Edge, Руководство пользователя

Результаты поиска

Содержание 2010 Edge

Отзывы:

Похожие инструкции для 2010 Edge

Бренды по названию

Популярные бренды