•
To program position 2, repeat the previous procedure using control
button 2.
•
A chime will sound confirming that a memory position has been set.
A position can be recalled:
•
in any gearshift position if the ignition is
not
on.
•
only in P (Park) or N (Neutral) if the ignition is on.
A memory seat position may be programmed at any time.
The memory positions are also recalled when you press your remote
entry transmitter
(unlock) control (if the transmitter is programmed
to a memory position) or, when you enter a valid personal entry code
that is programmed to a memory position.
To program the memory feature to a remote entry transmitter and for
more information on how to use the keypad, refer to
Remote entry
system
in the
Locks and Security
chapter.
Easy entry/exit feature (if equipped)
This feature automatically moves the driver’s seat rearward 2 in (5 cm)
when:
•
the transmission is in N (Neutral) or P (Park)
•
the key is removed from the ignition cylinder
The seat will move forward (to the original position) when:
•
the transmission is in N (Neutral) or P (Park)
•
the key is placed in the ignition cylinder
Heated seats (if equipped)
WARNING:
Persons who are unable to feel pain to the skin
because of advanced age, chronic illness, diabetes, spinal cord
injury, medication, alcohol use, exhaustion, or other physical
conditions, must exercise care when using the seat heater. The seat
heater may cause burns even at low temperatures, especially if used
for long periods of time. Do not place anything on the seat that
insulates against heat, such as a blanket or cushion, because this may
cause the seat heater to overheat. Do not puncture the seat with pins,
needles, or other pointed objects because this may damage the heating
element which may cause the seat heater to overheat. An overheated
seat may cause serious personal injury.
Seating and Safety Restraints
127
2010 Edge
(edg)
Owners Guide
(own2002)
, 1st Printing
USA
(fus)
Содержание 2010 Edge
Страница 322: ...Ford Extended Service Plan 322 ...
