Ford 2006 Ranger, Руководство пользователя

Страница: 82 / 256

While the system is designed to help reduce serious injuries, it may also
cause minor abrasions, swelling or temporary hearing loss. Because
airbags must inflate rapidly and with considerable force, there is the risk
of death or serious injuries such as fractures, facial and eye injuries or
internal injuries, particularly to occupants who are not properly
restrained or are otherwise out of position at the time of airbag
deployment. Thus, it is extremely important that occupants be properly
restrained as far away from the airbag module as possible while
maintaining vehicle control.
Several air bag system components get hot after inflation. Do not
touch them after inflation.
If the air bag has deployed,
the air bag will not function
again and must be replaced immediately. If the air bag is not
replaced, the unrepaired area will increase the risk of injury in a
collision.
The SRS consists of:
•
driver and passenger airbag modules (which include the inflators and
airbags),
•
one or more impact and safing sensors, passenger airbag deactivation
switch and diagnostic monitor (RCM)
•
a readiness light and tone,
•
and the electrical wiring which connects the components.
•
Safety belt pretensioners
The RCM (restraints control module) monitors its own internal circuits
and the supplemental airbag electrical system wiring (including the
passenger airbag deactivation switch, the impact sensors, the system
wiring, the airbag system readiness light, the airbag back up power and
the airbag ignitors).
Determining if the system is operational
The SRS uses readiness lights in the instrument cluster and the
passenger airbag deactivate switch or a tone to indicate the condition of
the system. Refer to the
Airbag readiness section in the Instrument
cluster chapter or Passenger airbag on/off switch section in this
chapter. Routine maintenance of the airbag is not required.
2006 Ranger (ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Seating and Safety Restraints
82