Adding engine oil
1. Check the engine oil. For instructions, refer to
Checking the engine
oil
in this chapter.
2. If the engine oil level is not within the normal range, add only certified
engine oil of the recommended viscosity. Remove the engine oil filler cap
and use a funnel to pour the engine oil into the opening.
3. Recheck the engine oil level. Make sure the oil level is within the
normal range on the engine oil level indicator (dipstick).
4. Install the indicator and ensure it is fully seated.
5. Fully install the engine oil filler cap by turning the filler cap 1/4 turn
until it stops.
To avoid possible oil loss, DO NOT operate the vehicle with the
engine oil level indicator and/or the engine oil filler cap removed.
Engine Oil Recommendations
2.3L & 3.0L Engines
Look for this certification
trademark.
Use SAE 5W-20 engine oil.
Only use oils “Certified For Gasoline Engines” by the American
Petroleum Institute (API). An oil with this trademark symbol conforms
to the current engine and emission system protection standards and fuel
economy requirements of the International Lubricant Standardization and
Approval Committee (ILSAC), comprised of U.S. and Japanese
automobile manufacturers.
To protect your engine’s warranty use Motorcraft SAE 5W-20 or an
equivalent 5W-20 oil meeting Ford specification WSS-M2C930-A.
SAE
5W-20 oil provides optimum fuel economy and durability
performance meeting all requirements for your vehicle’s engine
.
2006 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Maintenance and Specifications
209
Содержание 2006 Ranger
Страница 194: ...2 3L I4 engine 3 0L V6 engine 2006 Ranger ran Owners Guide post 2002 fmt USA fus Cleaning 194...
Страница 214: ...2 3L engines 3 0L and 4 0L engines 2006 Ranger ran Owners Guide post 2002 fmt USA fus Maintenance and Specifications 214...
Страница 244: ...4 1 2006 Ranger ran Owners Guide post 2002 fmt USA fus Maintenance and Specifications 244...
