BRAKE FLUID
The fluid level will drop slowly as
the brakes wear, and will rise when
the brake components are replaced.
Fluid levels below the “MAX” line
that do not trigger the brake system
warning lamp are within the normal
operating range, there is no need to
add fluid. If the fluid levels are outside of the normal operating range,
the performance of your brake system could be compromised, seek
service from your authorized dealer immediately.
CLUTCH FLUID (IF EQUIPPED)
Check the fluid level. Refer to
scheduled maintenance information
for
the service interval schedules.
During normal operation, the fluid level in the clutch reservoir should
remain constant. If the fluid level drops, refill the fluid level to the step
in the reservoir.
Use only a DOT 3 brake fluid designed to meet Ford specification
ESA-M6C25–A. Refer to
Lubricant specifications
in this chapter.
Brake fluid is toxic. If brake fluid contacts the eyes, flush eyes
with running water for 15 minutes. Seek medical attention if
irritation persists. If taken internally, drink water and induce vomiting.
Seek medical attention immediately.
1. Clean the reservoir cap before
removal to prevent dirt and water
from entering the reservoir.
2. Remove cap and rubber
diaphragm from reservoir.
3. Add fluid until the level reaches
the step in the reservoir.
4. Reinstall rubber diaphragm and
cap onto reservoir.
TRANSMISSION FLUID
Checking automatic transmission fluid
•
Refer to
scheduled maintenance information
for scheduled check
and change intervals.
MAX
2006 Ranger
(ran)
Owners Guide (post-2002-fmt)
USA
(fus)
Maintenance and Specifications
231
Содержание 2006 Ranger
Страница 194: ...2 3L I4 engine 3 0L V6 engine 2006 Ranger ran Owners Guide post 2002 fmt USA fus Cleaning 194...
Страница 214: ...2 3L engines 3 0L and 4 0L engines 2006 Ranger ran Owners Guide post 2002 fmt USA fus Maintenance and Specifications 214...
Страница 244: ...4 1 2006 Ranger ran Owners Guide post 2002 fmt USA fus Maintenance and Specifications 244...
