Drilling machine 12 V
a)
On / Off switch
f)
Work spindle
b)
Motor housing
g)
Quick-release chuck
c)
Spring retainer handle
d)
Cable
e)
Ventilation slots
■
Housing made of ABS
■
Input voltage:
0 – 18 V DC
■
Maximum power:
40W
■
Idle speed:
20.000 U/min
■
Maximum speed:
30.000 U/min
■
Drill chuck:
0.4 – 3.2 mm
■
Collet chuck
Please read this manual carefully before using the product!
Use of accessories:
Tooth chuck:
■
Switch the machine off.
■
Open the toothed chuck with the chuck key.
■
Insert shank of the accessory deep enough into the chuck and then close the chuck.
Quick-release chuck:
■
Switch the machine off.
■
Press the locking button or hold the drill chuck holder.
■
Open the drill chuck by turning it counter-clockwise.
■
Insert shank of the accessory deep enough into the chuck (do not use pliers).
ENG
e
a
d
f
b
c
g
