Force F-FID, Руководство пользователя

Страница: 5 / 9

5
ASSEMBLY DIAGRAM 2
REMEMBER: Only hand tighten all nuts and bolts until whole F-FID is assembled
1. Ensuring correct orientation, attach the SEAT SUPPORT (4) to the front holes in the upright bracket on the
MAIN FRAME (1) using a HEX BOLT M12X100 (28), two WASHER12 (34) and an AIRCRAFT NUT M12 (29)
2. Ensuring correct orientation, attach the BACKREST SUPPORT (5) to the rear holes in the upright bracket on
the MAIN FRAME (1) using a HEX BOLT M12X100 (28), two WASHER12 (34) and an AIRCRAFT NUT M12 (29)
3. Attach the REAR SUPPORT (8) to the underside of the BACKREST SUPPORT (5) using a HEX BOLT M12X115
(27), two WASHER12 (34) and an AIRCRAFT NUT M12 (29)
4. Connect the FOAM ROLL SUPPORT (6) to the front post of the MAIN FRAME (1) using a POP PIN (13) with
attached HANDBALL (37)
5. Attach the HANDLE GRIP (15) to the FOAM ROLL SUPPORT (6). Attach a HANDLE GRIP (21) to the REAR
SUPPORT (8)
(See the exploded diagram for more detail, skip this step if pre-assembled)