6
ASSEMBLY DIAGRAM 3
REMEMBER: Only hand tighten all nuts and bolts until whole F-FID is assembled
1.
Attach the BACKREST BOARD (11) to the BACKREST SUPPORT (5) using two HEX BOLT M8X55(23) and two
WASHER8 (32)
2.
Attach the SEAT PAD (10) to the SEAT SUPPORT (4) using two HEX BOLT M8X55(23) and two WASHER8 (32)
3.
Insert the FOAM ROLL FRAME (9) through the FOAM ROLL SUPPORT (6)
4.
Slide a FOAM ROLL (16) over each end of the FOAM ROLL FRAME (9) and attach using a FOAM BAFFLE (17)
and a HEX BOLT M10X20 (25) on each side.
5.
Insert the appropriate sized END CAPS (18,19, 35&36) into any open ends (
See the exploded diagram for
more detail, skip this step if pre-assembled)
Содержание F-FID
Страница 7: ...7 EXPLODED DIAGRAM F FID...
Страница 8: ...8 HARDWARE F FID...