6
dangerous due to their shape, height or slippage.
•
Avoid high traffic areas or overcrowded areas;
•
In any case, anticipate your trajectory and your speed while respecting the code of the road, the code
of the sidewalk and the most vulnerable;
•
Notify your presence when approaching a pedestrian or cyclist when you are not seen or heard.
•
Cross the protected passages while walking.
•
In all cases, take care of yourself and others.
•
Do not divert the use of the vehicle
•
Any load attached to the handlebar will affect the stability of the vehicle.
•
This vehicle is not intended for acrobatic use.
•
Always respect the code of the road of the country or area of the e-scooter use
•
Keep the eyes on the road situation during driving and don’t be distracted by peripheral electronic
accessories.
Before riding the E-scooter, please check that all parts are working as supposed to. If any loose parts,
abnormal noise, reduced battery life etc. are detected, please contact the after-sales service for product
service and warranty. Do not repair the E-scooter yourself.
Avoid applying too much force or stepping on the rear fender permanently. This may cause the fender to
loosen or damage the spring holding the fender. Avoid constant braking. As a result, the tires will not only
wear off, but also become hot. This will soften the rubber and it will no longer have the same grip on the
road as usual. Do not touch the tire after braking. CAUTION : The braking distance may be extended during
wet weather !
If you hear unusual noises or notice friction when switching on the E-scooter, a bearing may be damaged. A
worn bearing may even be indicated by strong vibration of the handlebar. In this case, please contact your
dealer since the bearing needs to be replaced and/or the handlebar checked and adjusted.
Ride the E-scooter only on a dry surface since otherwise the riding safety and braking performance may be
impaired and the motor or bearings may be damaged.
Please do not ride up or down long and steep slopes.
Stop riding when you receive the «Low Battery Warning». The E-scooter then moves only slowly and does
not have the same traction as normal and the electric brake does not work. In this case, please use the rear
brake to stop the E-scooter. Get off the scooter as soon as the speed allows to do that safely.
Do not use the electric brake and the throttle at the same time.
A normally working E-scooter operates safely and quietly. If you hear noises or notice bumpy operation,
please check wheels, bearings, and brakes. Contact your customer service for repair and maintenance, if
necessary.
MAINTENANCE
WARNING ! As with any mechanical component, a vehicle is subject to high stresses and wear. The various
materials and components may react differently to wear or fatigue. If the expected service life for a
component has been exceeded, it may break suddenly, therefore risking causing injuries to the user. Cracks,
scratches and discoloration in the areas subject to high stresses indicate that the component has exceeded
its service life and should be replaced.
Maintenance of batteries
Please make sure the batteries do not get over 50° Celsius, or minus 10° Celsius for a longer period of time.
Keep the E-scooter away from open flame or other sources of heat to prevent the battery from getting too
hot. Also make sure not to leave the E-scooter at freezing temperatures. Both heat and excessive cold can
cause the battery to discharge.
Please avoid draining the batteries 100%. It is best to charge them while there is still power on them. This will
extend battery life. Also if riding the E-Scooter in cold or very hot areas, the battery time can be lower than
when riding in temperatures from 15-25° Celsius. This is not a failure on the batteries, but are normal behavior.
Do not overcharge and discharge the battery. Make sure that the battery is charged at regular intervals,
even if you do not use the E-scooter for a long time. This is to prevent damage to the battery caused by low
voltage over an extended period.
NB: It is forbidden to disassemble battery package without the help or supervision of the after-sales service.
Maintenance of bearings
The E-scooter has sealed and dustproof bearings so that no lubrication is required. Check the bearings for
wear at regular intervals to avoid unsafe riding. Do not jump on and off and do not apply excessive force
Содержание SUPREM 6400
Страница 2: ......
Страница 3: ...3 1 8 9 17 x2 x2 x4 16 18 15 14 20 10 11 12 13 22 1 23 24 19 3 4 7 5 21 6 2 PRODUCT AND ACCESSORIES ...
Страница 66: ......
Страница 67: ......