Force Moov SUPREM 6400, Быстрый старт

Страница: 5 / 67

5
B.Folding the e-scooter:
1. Lift the security cover to access the unlock clasp
2. Press the unlock clasp while moving down slowly the front tube into horizontal position.
3. The rod clicks audibly into place.
4. Lower down the security cover back on the unlock clasp.
Assembling of the handlebar
1. With the help of the small Allen key tighten the LCD display and the brake’s screws to the handlebar.
To change the display angle, loosen screw on the handlebar, rotate the axle to make the LCD screen in
a comfortable position of viewing. Remember to tighten screws again.
2. Add the handlebars on each side and fix it to the bar by tighten their screws with the small Allen key.
Charge your e-scooter
1. Remove the protective cover of the charging port.
2. Plug the adaptor into the charging port of the scooter and the other end to the wall socket.
3. Fully charge your e-scooter before using it for the first time.
4. Put back properly the protective cover of the charging port.
Once your e-scooter is assembled and fully charged, you can turn it on/off by pressing the POWER ON/OFF
button. The speed control buttons help you to select the appropriate speed level.
Remember to read the full user guide and the safety instructions before driving.
Kick-start mode
Your e-scooter has a security start mode. To start riding, follow these steps:
1.
Put one of your foots to the deck and hold the handlebar tightly with your hands
2. Give a kick move with the other foot and then press progressively the Accelerator trigger
3. The scooter will start moving. To stop moving, press the brake trigger carefully.
INTENDED USE
The e-scooter is a device that the operator can ride relaxed on flat, clean and dry surface. The E-scooter
can be ride only by a person aged at least 14 with a maximum weight of 100 kg . The E-scooter may only
be operated in good visibility conditions and only if the physical conditions for stability on the E-scooter are
met (for example, not on one leg/not under the influence of drugs or alcohol). When operating the E-scooter,
the operator must wear personal protective equipment.
SAFETY INSTRUCTIONS
IMPORTANT!
Read carefully and keep for future reference
We recommend always wearing helmet and protective gear like elbow, knee and wrist protectors to ensure
your personal safety.
It is your responsability to be aware of and comply with all your national and local regulations and each
regulation applicable in the place where you e-scooter shall be used. If there are no regulations for this
e-scooter in your country, please take care of your own safety and the safety of others.
Also pay attention to other people. Always ride safely and only at a speed that allows you to brake safely at
any time. A common thing for such products is that there is a risk that you may fall off the product and injure
yourself. Always ride as safely as possible.
If lending the E-scooter to friends and family, please make sure they use proper protective gear and know
how to ride it.
Traffic in the city has many obstacles to cross such as curbs or steps. It is recommended to avoid obstacle
jumps. It is important to anticipate and adapt your trajectory and speed to those of a pedestrian before
crossing these obstacles. It is also recommended to get out of the vehicle when these obstacles become