background image

EN-7

When the difference between the first and second systolic 
pressure is more than 15mmHg, the time interval for third 
measurement will be 40 seconds.

5.  After taken three measurements, the test result is displayed 

on the screen.

 

Press the 

Power

 button to turn the device off.

Reviewing Test Results

Your device stores the 200 most recent blood pressure test 
results along with respective dates and times in the memory. To 
recall the memory, you have to connect your 

Diamond CUFF BP

 

to your mobile device. Once connected, the measured data is 
automatically imported to 

iFORA BP

 app.

Appendix

Maintenance

Changing Battery

When the battery is low, one of the following screen will appear:

• the “ “ icon appears with display messages: 

    
  This indicates the device is functional and the result remains 

accurate, but it is time to change the batteries.

• the “ “ icon appears with E-b: 

    

  This indicates the power is not enough for a measurement. You 

must change the batteries immediately.

To change the batteries, do the following:

1.  Push down the battery compartment cover to open it.

2.  Remove the old batteries and replace with four 1.5V AAA size 

alkaline batteries.

3.  Close the battery compartment cover.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN 

INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE 

INSTRUCTIONS.

Note:

• When the 

“ icon appears on the screen,

    

  

    

it indicates that you need to synchronize with your mobile   

    device in order to adjust the date and time settings. In addition, this  
    measurement will not be stored in meter memory. 
•  Replacing the batteries does not affect the test results stored in 

memory. However, if you did not synchronize with your mobile 
device after the battery replacement, the measured data will not be 
stored in the memory.

•  Keep away these batteries from small children. If swallowed, 

promptly seek medical assistance.

•  Batteries may leak chemicals if unused for a long time. Remove the 

batteries if you are not going to use the device for an extended 
period.

•  Properly dispose of the used batteries according to your local 

environmental regulations.

Содержание Diamond CUFF BP













Отзывы: