EN-6
After the measurement, the monitor displays the systolic
pressure, diastolic pressure and pulse rate.
3. Press
the
Power
button to turn the device off.
Note:
• If the device is left idle for 3 minutes, it will turn off automatically.
B. Average Measurement (via APP)
Automatically performs three (3) consecutive blood pressure
measurements and displays the average result in the end.
This function is only available when your
Diamond CUFF BP
is
connected to your mobile device.
1. Press
the
Bluetooth
button. The “
“ icon will appear on the
display, indicating that the device is ready to transmit data.
Important!
Be sure the device is properly connected to your mobile
device via Bluetooth.
ForaCare Suisse A
G
CH-
9000 St. Gallen
www.foracare.ch
Blood Pre
ssure Monitoring
System
Cuff BP
IP22
0.8”~1.2”
9.4"~16.9
"
24
~43c
m
2~3c
m
2. Launch
iFORA BP
app. The main screen appears on the
mobile device’s screen.
3. Set
Average Mode
to
ON
and tap
. Then the
cuff will begin to inflate automatically.
4. After the first measurement is complete, the device and
iFORA BP
app will start counting down before the second
measurement begins. The device will take three (3)
measurements consecutively with an interval of 20 seconds.
Note:
