EN-14
from your FORA 6 Duo via Bluetooth. Follow the steps below
to transmit data from your FORA 6 Duo. Please contact your
local customer service or place of purchase for assistance.
1. Install the software (
iFORA HM
) to your device
with an iOS or Android system.
2. Every time the FORA 6 Duo is turned off, the Bluetooth will
be initiated for data transmission. The Bluetooth indicator
flashes in blue.
3. Make sure your FORA 6 Duo is already paired with your
device with an iOS or Android system by following the
instructions as below.
Bluetooth Smart Meter
Search
Note:
• Press and hold
MAIN
for 5 seconds to exit the memory
mode or leave it without any action for 3 minutes. The
device will turn off automatically.
• If using the device for the first time, the “---” icon will appear
when you recall the test results or review the average result.
This indicates that there is no test result in the memory.
• Control solution results are
NOT
included in the day
average.
Announcement of Memory Result by
Universal Tone
Only the most recent result that was saved can be announced
acoustically. If you press
MAIN
to turn the meter on, you will
first hear the Long-Beep which stands for power-on and then
the most recent result.
Only the average for the last 7 days is announced acoustically.
If the 7-day average cannot be calculated, three horizontal
bars are displayed. This is signaled acoustically with 3 long
beeps representing 3 zeroes.
Transferring Data
Data Transmission Via Bluetooth
You can use your device with an iOS (5.0.1 or higher) or
Android system (4.3 API Level 18 or higher) to download data
