For-x MAESTRO-8DSP, Руководство пользователя

Страница: 6 / 30

Maestro-8DSP Special DSP Amplifier
3
Channel settings
1.Choose from 8 channels to choose from
2.Output channel volume setting, Click
【 】
the speaker button to mute.
2
、
Click
【 】
to adjust the volume by
sliding left and right.
2.Click phase for every output channel:
In Phase or Out Phase
（
0
゜
/180
゜）
Crossover settings
1. Channel high-low-pass crossover setting
with high-low-pass independent filtering.
2. Frequency Range: 20Hz~20KHz. Slope
selection: 6 dB/Oct
、
12dB/Oct
、
18dB/Oct
、
24dB/Oct
、
30dB/Oct
、
36dB/Oct
、
42dB/Oct
、
48dB/Oct
、
OFF.
Output Signal Function
●
Click [Link] to synchronize the data.
Delay setting
Click[Channel] to enter the delay interface.
Then click [ ] to enter the delay setting,
Slide the corresponding direction of the dot to
the left and right to set the delay. for the CH1 to
CH8 speakers.
Default Value: [MS], can switch to [CM]