For-x MAESTRO-8DSP, Руководство пользователя

Страница: 21 / 30

MAESTRO-8DSP Special DSP Amplifier
18
3. Software Operation
User Manual
PEQ button:
Click the "Parametric Equalizer" button to switch to the "Graphic Equalizer" mode.
The frequency, Q value and gain can be adjusted under the“Parameter EQ”interface;
only the gain adjustment can be made under the “Graphic Equalizer” interface, and
the frequency and Q value are not operational.
Reset EQ button:
It is used to restore the parameters of the 31-band equalizer to the original
pass-through mode (the frequency of the equalizer, the Q value and the gain are
restored to the initial value).
Restore All Equalizations button:
Switch between the currently designed equalizer state parameters and the
pass-through mode (the gain of all equalization points is restored to 0 dB, the
frequency and value are unchanged).
Reset Output Configuration button:
This button is to re-configure the output signal of the channel type of operation,
when clicked, will pop up prompt for users to choose. "Empty" is to get all the
output signal is not connected to any output channel speaker, of course, there will
be no signal output, in preparation for the user flexible configuration. "Default" is to
restore the initial system configuration, system configuration 4.1 sound field initial
full frequency mode. "Cancel" is to cancel the click operation.
Lock output Configure button:
Click this button to configure the channels CH1 to CH8 to lock or unlock operation,
it indicates that the configuration channel is locked, click this button again to unlock
the display when the button is green. In the unlocked state, click CH1~ CH8 can be
configured to output the positioning of the sound field; in the locked state, if the
output channel sound field is empty, you cannot click to enter the editing interface,
only the output channel sound field is not empty, click on the channel to enter edit
mode, but the channel is not possible to select the sound field.
Link output Configure button:
Click this button, a pop-up dialog box, select the synchronous mode (option to "copy