MAESTRO-8DSP Special DSP Amplifier
16
3. Software Operation
User Manual
Gain, drag around to adjust the equalizer frequency points; when the mouse is
moved to the left and right of the small red box, press and drag left and right to
adjust the equalizer Q. All parameters are displayed simultaneously adjust the
current real-time equalizer is also updated value EQ parameters editing area.
1. The output channel EQ editing method, all 31 equalizers will work for the next
parametric equalizer. When the parametric equalizer curve, if available in the box
below the corresponding input parameter values can be (frequency, Q value, and
gain) adjusted in real time will also be revealed at the top (as shown in Figure 3.3.8
parametric equalizer case).
Figure 3.3.8
Straight balanced:
the button shown in Figure 3.3.4, the current channel as long as
there is an equalizer in the open state, this button will appear highlighted in green
state, indicating that you can click this button to make all the equalizer current
channel change to not start moving (directly). Click the button that will return to
"restore the balance." Then click on "restore the balance" button will allow all current
equalizer channel back to the last activated state.
Note: This operation will change the equalizer gain.
Reset balanced:
the button shown in Figure 3.3.4, click this button to make all
current channel equalizer parameters return to the initial state: uniform distribution
of frequency, Q value is 1.2, a gain of 0dB.
Содержание MAESTRO-8DSP
Страница 30: ......
