6
1. Prior to Starting
1-1. Overview
The USF-105S is a low cost and space saving Universal System Frame that can be freely
configured. Up to 5 modules can be installed into one USF frame.
Dual, redundant power supplies can be configured by adding an optional USF-105PS power unit,
improving operation safety.
An internal switching hub and router allows high speed network communications and flexible
network systems.
1-2. Features
Up to 5 USF modules (boards) can be installed to match your system requirements.
Installing a USF-105PS enables a redundant (dual power supply) configuration.
All modules can be replaced from the front. Power supply units and front USF module units
both support hot-swapping.
Alarm sensors (Fan Stop/ Power Unit Voltage Error/ Temperature Error) and status indicators
(Power/ Fan/ Temperature) are shown on front LEDs.
Alarm data able to output from rear ports.
A genlock input (BB or Tri-level sync) with loop-through.
(Input reference signal able to be supplied to all frame modules installed in the unit.)
EIA Standard 1U size.
Monitoring with SNMP available.
High speed connection of each module via internal switching hub.
USF modules can be monitored and controlled via PC web browser.
1-3. About This Manual
This manual is intended to help the user easily operate this product and make full use of its
functions during operation. Before connecting or operating your unit, read this operation manual
thoroughly to ensure you understand the product. Afterwards, store this manual in a safe place for
future reference.
