FOR-A UFM-30UDC, Руководство по эксплуатации

Страница: 32 / 38

26

Ranges for Genlock Phase Adjustment
The menu display shows between -1319 and +1319 (pixels) for H phase and between -563 and
+562 (lines) for V phase in all video signal formats. However, the limits of the range vary by the
video formats. If you set a value beyond the range of a format, the limit value is applied. See the
table below for the limit values of formats.
Video Format Genlock H Phase [pixels] Genlock V Phase [lines]
NTSC -858 to +858 -263 to +262
PAL -864 to +864 -313 to +312
525/59.94i -858 to +858 -263 to +262
625/50i -864 to +864 -313 to +312
1080/59.94i -1100 to +1100 -563 to +562
1080/50i -1319 to +1319 -263 to +262
720/59.94i -825 to +825 -375 to +375
720/50p -990 to +990 -375 to +375
1080/59.94i (Level A) -1100 to +1100 -563 to +562
1080/50p (Level A) -1319 to +1319 -563 to +562
1080/59.94i (Level B) -1100 to +1100 -563 to +562
1080/50p (Level B) -1319 to +1319 -563 to +562