FOR-A UFM-30UDC, Руководство по эксплуатации

Страница: 15 / 38

9
7) To return to the upper menu, press the MENU OSD button.
<Menu>
Status
Input
Output
Scaling
8) To close the OSD screen, press the MENU OSD button again.
IMPORTANT
Automatic saving of last setting
The UFM-30UDC automatically holds the last setting applied to it. Therefore, when
you power off the unit,
wait more than 5 seconds after the setting change.
Otherwise, the last setting may not be preserved and not applied to the UFM-30UDC
when you power on the unit again.
4-2-4. Resetting All Items in the Menu
1) Press the MENU OSD button to display the menu on the composite monitor.
2) Press the MENU OSD button again to close the menu screen.
3) Press and hold down the DOWN button
more than 10 seconds .
4) With holding down the DOWN button, press the MENU OSD button. The Configuration
appears at the bottom of the menu display.
5) Select Configuration using the UP and DOWN button. Then press the SELECT button
to display the Configuration dialog.
6) Select Factory Default in the Configuration dialog and press the SELECT button. When
the cursor is automatically moved to Press Select , press the SELECT button again to
reset the menu. All items in the menu return to their factory default settings.
7) Press the MENU OSD button to quit the Configuration dialog.
8) Press the MENU OSD button again to close the menu screen.
MENU SELECT UP DOWN
OSD
UFM-30UDC
CPU/
COMMS
IN
OK
REF
OK
HD
OUT
3.0Gb/s
OUT
POWER