FOR-A HVS-AUX16, Руководство по эксплуатации

Страница: 35 / 51

35
6-4-1. Setting Quick Select
1) Press and hold down the menu control for two seconds to enter the Setup menu.
2) The "OUT?" item will appear in the menu display. Press the menu control.
3) Turn the menu control counter-clockwise to display "QIK."
4) Number buttons on the front panel turn on. These buttons represent the controllable
buses. Now you can select the buses that you want to control from the AUX unit. Turn off
the buttons (buses) that you don't want to control and keep light on the buttons (buses)
that you want to control.
For example, Button1-16 (AUX1-16) will light up if HVS-3800HS is connected. To control
AUX1-4, keep Button1-4 light on and press other number buttons to turn off their button
light as shown below.
To control only AUX1-4 , turn off other number buttons.
If the number of the AUX buses exceeds that of the buttons on the AUX unit:
For example in the case when HVS-AUX8 has eight buttons and 32 auxiliary buses have
to be set on it: Eight buttons on the HVS-AUX8 represent AUX1-8. Pressing SHIFT (lit
indication) changes the buttons to AUX9-16. And then turning menu control changes the
buttons to AUX17-24, then AUX25-32.
To set M1PG to M3PS (HVS-4000 only), select 25 to 30.
5) Press the menu control to confirm the setting.
6) Press SHIFT to display EXIT then press menu control to exit menu setup.

Checking AUX bus and Signal
The currently selected signal name for the AUX bus is displayed in the ordinary
operations.
Shortly pressing the menu control displays the AUX bus controlled from the AUX unit in
two seconds.
Press shortly
A X 0 1
POWER
CONT
I N 0 1
POWER
CONT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
PGM 1
PGM 2
PREV 1
PREV 2
CLEAN 1
CLEAN 2
SHIFT
HVS-AUX32
AUXILIARY UNIT
A A A A
POWER CONT
Q I K
POWER
CONT
USO
RESTRITO