11
HVS-AUX16
AUX ILIARY UNIT
POWER CONT
A A A A
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
SHIFT
PGM 2
PREV 2 CLEAN 2
2-1-2. HVS-AUX16
①
a
③
④
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PGM 1
PREV 1 CLEAN 1
①
Signal Select Buttons
① ① ① ②
b
c
d
Used to select signal for switcher AUX outputs as well as HVS-4000 series M/E buses.
Note that each button is marked with two signal indications and is used to select one of the
two. SHIFT button
②
determines which one of the two signals appearing at any of the above
buttons is selected when button is pressed. The output signal can be selected as any one of
the signals described below (factory settings).
Select
(a) M/E signal 1
–16 / 16–32 (Primary inputs, stills, etc.)
Or
(b)
Program outputs
Or
(c)
Preview outputs
Or
(d)
Clean outputs
If controlling an
AUX bus
:
Available buttons:
①
a, b, c
and
d
above
If controlling an
M/E bus
(HVS-4000 only):
Available buttons:
①
a
above
②
SHIFT (TAKE) Button
Used in conjunction with buttons
①
a
–d above to select output signal appearing as output at
switcher. SHIFT has three operation mode;
Normal
,
Non-shifted
and
Take
. (See section 6.
"Operations.")
Normal
mode
SHIFT is enabled. (Press SHIFT then buttons
①
a
–d above.)
Selectable signals are
1-32, PGM1-2, PREV1-2
and
CLEAN1-2.
Non-shifted
mode SHIFT is disabled.
Selectable signals are
1-16, PGM1, PREV1
and
CLEAN1
.
Take
mode
SHIFT is used in conjunction with buttons
①
a
–d above to confirm
the signal selection. (Press buttons
①
a
–d above then SHIFT.)
Selectable signals are
1-16, PGM1, PREV1
and
CLEAN1
.
* When controlling an HVS-4000 M/E bus, only
1-32
are selectable in
Normal
mode.
③
Indicators
POWER Indicator
Lit green
when power is applied to the unit.
CONT Indicator
Lit green
when control communication is occurring correctly
between the Auxiliary Unit and the switcher.
Unlit
when control communication is not occurring or has failed
due to error. In this case check the displayed message and take an
appropriate action. See section 4-1."Warning Messages".
Flashing
during setting the Setup menu.
LED Menu Display Used to make settings for Auxiliary Unit setup and operation.
④
Menu Control
Used to select setting to be made / changed at LED display.
NOTE
Any signal available in the switcher can be freely assigned to these bus buttons. See
section 5-3.
“Free Assign” for more details.
USO
RESTRITO
Содержание HVS-AUX16
