FOR-A HVS-AUX16, Руководство по эксплуатации

Страница: 29 / 51

29
5-3. Free Assign
The user can free assign source signal designation at the Auxiliary Unit if they need to be
changed to match your switcher setup. Note that the procedure to make assignment settings is
different from the general procedure given in section 5-1 previous.
To make assign settings:
1) Turn menu control until to "ASSN" appears in the LED display, then press menu control once.
2) The assignment setting for the current button selected signal should appear in the LED
display.
3) If you want to change the assignment for the current button selected signal, turn the control
until the desired signal setting is displayed.
4) Press the control to make the assignment setting for that button selection.
5) If you wish to make another signal assignment, press menu control then press the button for
a different signal selection. Repeat steps 2) through 4) above.
6) When you are finished making assignments, with "ASSN" displayed turn menu control until
EXIT is displayed. Press menu control to escape menu setting operation.
Factory Default Settings
Model Button Assigned Bus Available Settings
HVS-300HS
1-12 IN01-IN12
BLAK,
27 CB
IN01-IN12
29-30 STL1-STL2
STL1-STL2,
MATT,
PGM1 PGM
CB,
PGM2 KEY
PGM,
PREV1 PREV
PVW,
CLN,
PREV2 MV
MV,
CLEAN1 CLN
KEY,
NON
CLEAN2 -
Model Button Assigned Bus Available Settings
HVS-350HS
1-24 IN01-IN24
BLK (BLACK),
25-28 STL1-STL4
29 CLBR
IN01-IN24,
30-31 MV1-MV2
STL1-STL4,
32 BLK
MATT1-2,
CLBR,
PGM1 MEPG
MEPG, PGM,
PGM2 PGM MEPV, PREV,
PREV1 MEPV
MECL, CLN
MV1 - MV2,
PREV2 PREV
NON
CLEAN1 MECL
CLEAN2 CLN
IMPORTANT
Note that each button is marked with two signal indications and is used to select one of
the two in the HVS-AUX8/16. SHIFT button determines which one of the two signals
appearing at any of the above buttons is selected when button is pressed. Upper
indications are active when SHIFT is unlit and lower indications are active when
SHIFT is lit.
USO
RESTRITO