Foppapedretti SKILL i-Size, Руководство по сборке

Страница: 25 / 100

• ENGLISH •
25
IMPORTANT:
1. Only use the car seat in the direction of travel. Positioning the car seat on the front
passenger seat is not recommended.
2. This car seat can only be installed if the suitable vehicles are equipped with 3-point
safety belts, approved according to UN/ECE R16 or other equivalent standards.
3. Do not use with a two-point safety belt under any circumstances.
Ensure that you have correctly attached the vehicle’s three-point safety belt.
Check that both FIX connectors are properly attached to the anchorage points. Both
Smart Fix indicators are green
WARNING! When used in vehicles equipped with rear seat belts with integrated airbags
(inflatable belts), follow the car manufacturer’s instruction manual.
• Never use this seat on side-facing seats or in the opposite direction of travel.
• WARNING! It is recommended to install the car seat on the rear seats because,
based on accident statistics, they are considered safer. It is recommended to place
the car seat in the centre rear seat if equipped with a three-point safety belt.
• If the car seat is positioned on the front seat, for greater safety, it is recommended to
move the vehicle seat back as far as possible, if feasible with the presence of other
passengers in the rear seat and to adjust the backrest to the most upright position.
If the car is equipped with a seat belt height adjuster, fix this at the lowest position.
Ensure that the seat belt adjuster is in the rear position (or most aligned) with the
vehicle seat backrest.
• Do not install the car seat on the front seat if equipped with an active front AIRBAG.
In the case of installation on any seat protected by an airbag, always refer to the car
instruction manual.
USE IN THE VEHICLE
4E.