• ENGLISH •
13
USER INSTRUCTIONS
PUT THE BABY CARRIER ON
(fig.1, fig.2)
WARNING
: Always adjust the shoulder straps to correct fit on the shoulders
before placing the child in the baby carrier.
Open the clips placed on the lateral belts.
Using the carrier it is recommended to cross the lateral belts on the back for a
major safety, in order to prevent the belts from possible slipping of the shoulders.
Fasten the lateral belts and adjust them to your body by pulling the remaining
straps of the belts.
Fasten the buckle of the lumbar belt and adjust to proper fit by pulling the
adjustment strap.
After having adjusted the lumbar belt to a correct fit, insert the remaining strap
of adjustment into the loops in order to prevent it from loosen during use. ( fig.2).
HOW TO PLACE BABY INSIDE THE BABY CARRIER
It is recommended that you place the child in the baby carrier while sitting.
PLACE THE BABY IN THE BABY CARRIER LOOKING INWARDS FACING
PARENT
(fig.3 - fig.6)
In order to place the baby easily and comfortably in the baby carrier, unfasten
the clips “
a
” and “
b
” and release the touch fastener “
c
” from one of the lateral
sides (fig.3).
Place the child, in front of you, inside the baby carrier from the open side (fig.4)
WARNING
: Hold your child safely while carrying out this operation. Ensure that
the child’s legs are positioned correctly, straddling the seat, and that the arm is
positioned correctly through the proper opening.
Close the touch fastener making sure the correct position of the legs.
WARNING
: Ensure that all the buckles are fastened correctly.
It is necessary to adjust the width around baby’s waist and leg openings. Ensure
that the baby carrier is neither too large nor too tight, and that it fits the baby’s
body correctly (fig.6)
Repeat the same operation on the other side.
The harness opening for legs must be as tight as possible.
Adjust the upper buckle straps according to the baby’s body.
If the baby is able to control his/her neck you could lower the head support of the
baby carrier. (fig.8 - fig.10). Ensure that all the buckles “
a
” are fastened correctly.
USE
