FONESTAR FO-20M44XT, Инструкция по эксплуатации

Страница: 3 / 48

RECEIVERS
1.-
POWER : receiver LED power indicator.
2.- CAT. 5e/6 : Cat 5e/6 cable connector.
The yellow LED power indicator lights up to indicate that the receiver and the matrix are connected to
each other.
The green LED power indicator lights up to indicate signal transmission compatible with HDCP.
3.- OUTPUT : digital signal output in the receiver, HDMI connector.
4.- IR IN : remote control receiver connection input mod. IR-7R .
5.- OUT : remote control transmitter connection output mod. IR-7T .
REMOTE CONTROL
For the remote control to work, you should first connect the remote control
receiver provided in the IR EYE connector located on the rear panel of the
matrix. Point the remote control at the receiver so that the matrix makes the
changes.
1.-
Matrix on/standby button.
2.- INPUTS : input channels 1-4.
3.- OUTPUTS : output channels 1-4.
4.- ALL : allows all inputs/outputs to be selected.
5.- CLEAR : allows the operation that is currently being performed to be
cancelled.
6.- EDID : allows the selected input or inputs to copy the EDID information
from the required output.
7.- ENTER : confirms the operation. This button has to be pressed when
performing an operation with the remote control so that the changes are
made.
- 3 -
EN
FO-20M44XT_MANUAL_(EN_ES_FR_PT)_A5c_20200921-2020.qxp_Maquetación 1 21/9/20 11:19 Página 3