FONESTAR FO-20M44XT, Инструкция по эксплуатации

Страница: 4 / 48

EXAMPLES OF OPERATIONS WITH THE REMOTE CONTROL
SENDING FROM INPUTS TO OUTPUTS
To send an input to an output (input 1 to output 3):
Press INPUT 1 + OUTPUT 3 + ENTER
To send an input to several outputs (input 2 to outputs 3 and 4):
Press INPUT 2 + OUTPUT 3 + OUTPUT 4 + ENTER
To send an input to all the outputs
Press INPUT 4 + ALL + ENTER
EDID MANAGEMENT
One input (input 2) copies the EDID information from an output (output 4)
Press EDID + INPUT 2 + OUTPUT 4 + ENTER
All the inputs copy the information from one output (output 4)
Press EDID + ALL + OUTPUT 4 + ENTER
There are 5 types of preset EDID data as can be seen in the table.
If you wish to use this function and load one of these 5 preset types, press and hold the EDID button for at
least 3 seconds. The different EDID data types are selected with the OUTPUT 1 and OUTPUT 2 buttons.
Then press the ENTER button to confirm the selection.
The OUTPUT 1 button selects the EDID data type 1, 2, 3, 4, 5, 1, 2... and so on.
The OUTPUT 2 button selects the EDID data type 5, 4, 3, 2, 1, 5, 4... and so on.
Example 1:
Select the EDID 3 data type in the matrix input 2:
Press and hold EDID for at least 3 s INPUT 2 + OUTPUT 1 (press 3 times) + ENTER .
Example 2:
Select the EDID 4 data type in the matrix input 4:
Press and hold EDID for at least 3 s INPUT 4 + OUTPUT 2 (press twice) + ENTER .
CLEAR OPTION
Press the CLEAR button when you wish to cancel any operation you are performing with the remote control.
The matrix returns to the previous configuration status.
No. EDID
1 1080p, 2D, 2CH audio
2 1080p, 3D, 2CH audio
3 1080p, 2D, multichannel audio
4 1080p, 3D, multichannel audio
5 3840 x 2160, 2D (30 Hz)
- 4 -
EN
FO-20M44XT_MANUAL_(EN_ES_FR_PT)_A5c_20200921-2020.qxp_Maquetación 1 21/9/20 11:19 Página 4