USING THE CONFIGURATION FILE
The
AIP-4010
audio transmitter obtains an IP address automatically if the DHCP option on the router is
activated. Otherwise, the IP address has to be assigned manually and all the parameters have to be set to
make it suitable for its data network and the equipment to work. When all options have been established, a
file can be generated to set the
AIP-4010
transmitter.
Execute the AIP-Go application and follow the steps below:
In the program options, select the option ‘General > Advanced > Device setup’ and the following window will
open.
1.- Activate/deactivate the option to change the
name of the transmitter.
2.- Write the name of the transmitter to be set.
3.- For activating/deactivating the change to the
network configuration.
4.- Activate/deactivate the DHCP setting.
With the DHCP option deactivated, the following
can be set:
5.- The IP address on the
AIP-4010
transmitter.
6.- The Netmask for the
AIP-4010
transmitter.
7.- The gateway for the
AIP-4010
transmitter.
8.- For changing the range of gates for the
channel.
9.- Insert the range of the ports from the
AIP-
4010
transmitter to be set or use the default
option.
10.- For activating/deactivating the change in the
connection parameters.
11.- For selecting the multicast group that the
device will join. Use the default option or set
the group by inserting the values.
12.- For modifying the communication port
between the transmitter and the rest of the
devices.
13.- For defining the lifetime of the network data.
- 7 -
EN
AIP-4010_MANUAL_(EN)_20170529_Maquetación 1 29/5/17 9:38 Página 7
