RESETTING THE DEFAULT VALUES
The
AIP-4010
audio transmitter gives the option to set the equipment with the default values. To do this,
follow the steps below:
1.- Insert a cylindrical element with a diameter of less than 3 mm through the reset button hole on the front
panel of the equipemnt.
2.- Hold the reset button down for 20 seconds.
3.- Wait for an audio signal that will indicate that the equipment has been restarted with the default values.
AIP-4010 OPERATING STATUS
The red and blue indicators, together with the audio signals show the current status of the system. These
indications start working 30 seconds after switching the
AIP-4010
transmitter on. Below you will find a
description of all the operating status for the equipment in accordance with the state of the indicators on the
front panel:
LED INDICATORS
STATE / FUNCTION
Permanently alight in blue.
Configuration of the IP address using DHCP and default
connection parameters.
Stay alight in blue and blink once every 6
seconds.
Configuration of the fixed IP address and default
connection parameters.
Stay alight in blue and blink twice every 6
seconds.
Configuration of the IP address using DHCP and
different connection parameters to the default values.
Stay alight in blue and blink three times every
6 seconds.
Configuration of the fixed IP address and different
connection parameters to the default values.
Blink once in red every 6 seconds.
Equipment with no network connection.
- 10 -
EN
AIP-4010_MANUAL_(EN)_20170529_Maquetación 1 29/5/17 9:38 Página 10
