21
1.12.
failures that cannot be reset
The display shows the failure based on the corresponding error code (see paragraph 1.2.). Some failures can be reset through the "reset" button,
while some others are self-resettable. Refer to the following paragraph (“Resume boiler function”).
If failures cannot be reset but are of the self-resettable type, no key will be enabled and only the LCD backlighting will be on. As soon as the error
cause is eliminated, the failure signal will disappear from the interface, this latter will be enabled and, 15 seconds after no key is touched, all the
keys but the one around the LCD will be disabled.
1.13.
Boiler reset
The display shows the failure based on the corresponding error code (see paragraph 1.2.). Some failures can be reset through the reset key, while
some others are self-resettable.
If shut-downs can be reset (E01, E02, E03, E08, E40, E80, E86, E87), the reset key and the LCD back lighting will always be on. The only active key you
can press is the reset key.
When the reset key is pressed and boiler is under the correct conditions, the error is reset. The failure signal will disappear from the interface, this
latter will be enabled and, 15 seconds after no key is touched, all the keys but the one around the LCD will be disabled.
