Fondital GIAVA KRB 12, Руководство по установке, использованию и техническому обслуживанию, Страница: 4 / 68

4
Rapid operating instructions
The following instructions will help you to switch the boiler on quickly and regulate it for immediate use.
It is presumed that the boiler has been installed by a qualified installer, it has been commissioned and is ready to operate correctly.
If any accessories have been fitted on the boiler, these instructions will not cover them. You will therefore have to refer to the full
boiler instructions as well as to the specific instructions for the accessories.
This manual contains full details of how the boiler works, and full operating and safety instructions.
1. Open the gas cock installed ahead of the boiler.
2. Turn the master switch installed ahead of the boiler ON: the boiler display (fig. 1) turns on.
3. If you do not wish to activate the heating function, press the "operating mode selection" button
until it will
display the symbol : only the DHW function will be enabled.
4. If you wish to activate both the heating and DHW functions, press the "operating mode selection" button
until
displaying the symbol .
5. If you do not wish to activate the DHW function, press the "operating mode selection" button
until displaying
the symbol : only the CH function will be enabled.
6. To set the DHW water temperature press “DHW + and -” buttons (D, fig. 1). Set temperature as required.
7. To set the heating water temperature, press “CH + and -”buttons (E, fig. 1). Set temperature as required.
8. Set the desired temperature on the (optional) ambient thermostat in the building.
The boiler is now ready to operate.
If the boiler shuts down, press "reset" button (F, fig. 1).
If the boiler does not resume its standard operation after three attempts, contact a qualified Service Centre.