Fon TG589vn v3, Руководство пользователя

Страница: 40 / 79

36
5 Saving Energy
DMS-CTC-20130614-0000 v2.0
5.2 ECO Manager
Introduction
The TG589vn v3 constantly monitors the user activity and uses this information to optimise the power consumption:
For example:

The TG589vn v3 reduces the clock frequency of the central processor when there is no or low user activity. This lowered
clock frequency will result in a lower power consumption of the TG589vn v3.

Disable the USB port(s) when they are not used

Switch the wireless interface to power reduction mode .
Wireless access point power reduction mode
When the TG589vn v3 access point switches to power reduction mode, the access point is switched off and is only power on
periodically to be able to detect new clients. If new clients are detected the wireless access point is fully powered again. This
is only possible if there are no devices connected to the TG589vn v3.
Power reduction is enabled by default, but it is possible to disable it via the TG589vn v3 GUI. To configure power reduction:
1 Browse to the TG589vn v3 GUI.
For more information, see
“Accessing the TG589vn v3 GUI” on page 23 .
2 Under Home Network , click Wireless .
3 In the Navigation bar , click Configure .
4 Under Configuration :
 Select Power Reduction Enabled to enable power reduction.

Clear Power Reduction Enabled to disable power reduction.
5 Click Apply .
Example
If we use the same example as in the previous section, you can see that the TG589vn v3 is now able to further reduce the
power consumption in periods where less action is required from the TG589vn v3.
No User Traffic
User Traffic
Time
20:00
Time
Power
Consumption
Full power limit
Low power limit