- 37 -
10.
B
B
A
A
T
T
T
T
E
E
R
R
Y
Y
C
C
H
H
A
A
R
R
G
G
E
E
R
R
10.1 Charger Operation
Electromagnetic Induction Charge
The electromagnetic induction charger with undisclosed metal charging contacts on transmitter
provides immediate charging simply by sliding the transmitter into the charger. It is not necessary to
open the battery cover to replace batteries.
To avoid rain, high temperature, humidity and corroding air, please place or install the battery charger
indoor with good ventilation. Keep 5cm space for two sides of the charger to keep the heat out. The
suggesting temperature range is 0 ~ 40
℃
.
(Fig. 16) Front view
Battery charger voltage AC100~240V 50/60Hz, power consumption 10W
。
Use Nickel-Metal low self-discharge Hydride (NI-MH) 2000mA, AA size*2 rechargeable batteries.
Charging can be completed in 3 hours.
Set the power switch on the OFF position whenever transmitter is not operated. Press E-STOP button
and slide-in the transmitter into the charger to charge. The transmitter is suggested to be charged
whenever it is not operated. The power switch should be rotated to OFF position while charging,
otherwise charging cannot be proceeded.
The charger status light shows red when transmitter is charging; transmitter status light will be off
when charging is completed or failed. Please refer to below Battery Charger LED Status Light for
details. The charger status light shows green when charging is completed.
Charger power LED: green
