Fomei TR-X 32, Руководство пользователя

Страница: 9 / 14

C.Fn-02
Zoom setting AU Changing with camera’s zoom value,
flash’s auto zoom functions should be
turned on.
20, 24, 28, 35,
50, 70, 80, 105,
135, 200
Zoom (20, 24, 28, 35, 50, 70, 80, 105,
135, 200 mm)
C.Fn-03
PC sync socket
as an
input/output In PC sync socket connects with camera as
an input.
ou PC sync socket connects with camera as
an output.
C.Fn-04
Second curtain
sync (*) -- Second curtain sync off
on Second curtain sync on
C.Fn-05
Minimum power
output value in
M/Multi mode 1/128 1/128
1/256 1/256
C.Fn-06
AF assist -- OFF
on ON
C.Fn-07
Displayed groups 03 3 groups displayed
05 5 groups displayed
C.Fn-08
Beeper ON/OFF -- Turn off the beeper on the receive end
on Turn on the beeper on the receive end
Double- click the „CH“ button to turn on/off the modeling lamp of the receive end.
Press the „TEST“ to turn on the flash trigger. When the indicating light blinks two t imes, it
means the effective remote distance is below 30m, thus the transmitter and receiver can
communicate normally no matter how near they are.
(*) Second curtain sync cannot be set through the camera’s external flash functions setting.
When using second curtain sync, the effective shutter speed range is from 1/30s to 30s. when
shutter speed is set as buLb or is quicker than 1/30s, the settings are invalid. After being turned
on, second curtain sync is effective even though HSS has been set and the shutter speed range
is from 30s to 1/30s. After second curtain sync is turned on, synchronization delay settings are
invalid.
1. Press the „CH/OK“ button for 2s or longer until „Fn“ is displayed.
2. Select the custom function number with the select dial.
3. Change the setting
- Press the „GR“ button until the custom function number blinks.
- Turn the select dial to set the desired number. Pressing „GR“ button
will confirm the settings.
- Press „MODE“ button to exit the „C.Fn“ settings.
•
Wireless shutter release mode – half p ress the „TEST“ to focus. Fully press the „TEST“ and the
indicating light turns red. Now camera is ready to shoot. When releasing the button, the
indicating light turns off.
•
Setting the camera – to achieve FP flash, set „e1: flash sync speed“ to „1/250s (Auto FP)“ in
the Nikon camera setting to get a stable transition from standard sync mode to high speed
sync mode. Do not use 1/320s (Auto FP).