Fomei TR-X 32, Руководство пользователя

Страница: 8 / 14

group is in the „TTL“ mode, all the other groups which are in the „M“ mode will change
their FEC amount simultaneously. The FEC amount is changeable from -3 to 3 in 0,3
stop increments, until one of the group’s setting turns to the maximum (3) or the
minimum (-3). If the current group is in the „ -- „ mode (flash OFF) the amounts will not
change.
- 4. If the groups in the „M“ mode or „TTL“ mode work together, the first FEC amount
which up to the maximum ort he minimum is considered as the limitation.
- 5. Short press the „GR“ button again to confirm the setting.
•
Test flash
- 1. Press the „TEST“ to see the whether flash will fire normally or not.
- 2. Fully press the „TEST“ and the indicating light turns red and the flash on the receive
end can be triggered.
- 3. Use the transmitter to control camera to focus or shoot and the transmitter is
connecting to the camera (do not connect to the flash) now.
- 4. In the standby mode, press the „TEST“ can wake up the receiver.
- 5. The settings on the transmitter end will synchronize to the receiver end at the same
time.
•
Modeling lamp control – double- click the „CH/OK“ button to power ON/OFF the modeling
lamp.
•
Setting GR grouping mode
- 1. Press the „MODE” button until „Gr” icon is displayed, which shows that GR grouping
mode has been set.
- 2. To cancel GR grouping mode, press the „MODE” button again until the „Gr” icon
disappeared.
- GR mode can only be used normally when attaching to the CANON EOS cameras that
issued after 2012. In the GR mode, multi flash cannot be set.
•
Automatically enter power saving mode
- 1. The flash trigger will go into standby mode after the transmitter enter sleep mode
and the displays on the LCD panel will disappear.
- 2. Press any of the button can wake up the flash trigger. If the transmitter is attached
to the Nikon DSLR camera, half press the shutter can also wake up the system.
- 3. If the transmitter is set to single contact mode, the system will not enter power
saving mode.
•
C.Fn: setting custom functions – The following table lists the available and unavailable custom
functions of this flash.
Custom
functions
number Functions Setting signs Settings and description
C.Fn-00
Synchronization
delay setting 0 No delay
1-100 Master flash synchronization delay
N*100
C.Fn-01
Single contact
mode -- OFF
on It is advisable to set the transmitter to
single contact mode when using it to
trigger the flash by PC cord or through
camera’s single contact.