Fomei TR-X 32, Руководство пользователя

Страница: 10 / 14

Setting the receiver:
•
Channel setting
- 1. Short press the „CH“ button and the channel amount will increase a st ep each time.
- 2. Long press the „CH“ button will enter quicker adjustment mode. The channel
amount will increase fast in this mode.
- 3. Release the „CH“ button and the current channel amount is confirmed.
- 4. The channel amount will increase from 1 to 32. when the current channel is 32,
press „CH“ button again and the channel 1 will be displayed on the panel.
•
Group settings
- 1. Short press the „GR“ button and the group amount will increase a step each time.
- 2. Long press the „GR“ button will enter quicker ad justment mode. The group amount
will increase fast in this mode.
- 3. Release the „GR“ button and the current group amount is confirmed.
- 4. The group amount will increase from A to E. when the current group is E, press the
„GR“ button again and the group A w ill be displayed on the panel.
•
Automatically enter power saving mode
- 1. The system will go into standby mode after the transmitter goes into standby mode.
And the displays on the LCD panel disappear now.
- 2. To wake up the system, press the „TEST“ or the „GR“ button. Fully press the „TEST“
of the transmitter can also wake up the receiver’s system. If the transmitter is attached
to the Nikon DSLR camera, half press the camera shutter can also wake up the system.
Selecting the operation method
Transmitter:
TR-X 32 – operation method 1 (by default)
TTL/M mode (In the GR mode or NON-GR mode)
Button Operation Function
CH/OK
Short press Enter „CH“ settings (under normal status), confirm and back
to normal status (under settings)
Double-click Control the ON/OFF of modeling flash
Long press for 2s Enter C.Fn custom settings
Long press for 5s Switch the operation methods (method 1/method 2)
GR
Short press select power/FEC settings
Long press for 2s Select all the group
MODE Short press Switch the gro up’s mode (TTL/M/--) (TTL/M/OFF in the GR
mode; TTL/M/Multi in the NON-GR mode)
Select dial
Status Function
Normal Set the group
Set the channel Adjust the channel amount
Set the group Adjust the group’s power /FEC amount