background image

  

MCD425A/W, R425A/W, MFD425A/W, P425A/W Ice Machines 11

Electrical system

 

ATTENTION!

To prevent circuit breaker overload, wait 15 minutes before restarting this unit. This allows the compressor 

to equalize and the evaporator to thaw. 

Normal control board operation

The PC board indicator lights provide all the information necessary to determine the machine's status. Green 

indicator lights generally represent “go” or normal operation; yellow indicators represent normal off conditions; red 

indicators generally represent alarm conditions, some of which will lock the machine off. 
A flashing green light labeled POWER indicates power to the machine. All other normal operation status indicators 

are covered as follows:

Ice machine disposition

Operating conditions

FLASHING

ON or OFF

Legend:

OFF

ON

1.  Ice machine is making ice. 

1. 

Normal running.

2.  Ice machine is not making ice.

2. 

Normal time delay. When the bin fills with ice, the LOW BIN 
light goes out momentarily and the refrigeration and auger 
drive systems immediately shut down. (

Note: The fan motor 

will continue to run for 10 minutes to cool condenser) The TIME 
DELAY light comes on, initiating the time delay period. When 
the time delay expires, the machine will restart provided that the 
LOW BIN light is on. 

DIP Switch Settings

Sleep cycle dispense duration

OFF    ON

1
2
3
4
5
6
7
8

4
5

4
5

4
5

4
5

35 s

15 s

5 s

60 s

OFF POSITION

ON POSITION

Sleep cycle 
enabled
Not used
Sleep cycle
dispense duration
60 min. time delay
Flush enabled*
Maint. timer OFF

OFF    ON

Sleep cycle 

disabled

Not used

Sleep cycle

dispense duration

20 min. time delay

Flush disabled

Maint. timer ON

1
2
3
4
5
6
7
8

Sleep cycle 
enabled
Not used
Sleep cycle
dispense duration
60 min. time delay
Flush enabled
Maint. timer OFF

OFF    ON

Sleep cycle 

disabled

Not used

Sleep cycle

dispense duration

20 min. time delay

Flush disabled

Maint. timer ON

MCD425A/W_T, MCD425A/W_S, R425A/W

Replacement P425A/W installed in Symphony dispenser

Sleep cycle 
enabled
Not used
Sleep cycle
dispense duration
60 min. time delay
Flush enabled
Maint. timer OFF

OFF    ON

Sleep cycle 

disabled

Not used

Sleep cycle

dispense duration

20 min. time delay

Flush disabled

Maint. timer ON

425A/W installed in Symphony Plus 

25/50/110 CI, CT, or FB

*  Flush can be enabled on Symphony CT and FB models. Flush should be disabled on Symphony CI units due to risk of internal leak if 

drain line is blocked. All Symphony Plus models should be set to Flush enabled.

1
2
3
4
5
6
7
8

1
2
3
4
5
6
7
8

Содержание MCD425A









































Отзывы: