background image

400A/W 220 V 60 Hz/230 V/50 Hz Ice Machines

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding 
after-the-sale support. To ensure that this equipment delivers that same degree of service, we ask that you review 
the installation portion of this manual before beginning to install the unit. Our instructions are designed to help you 
achieve a trouble-free installation. Should you have any questions or require technical help at any time, please call our 
technical service group at (877) 612-5086 or +1 (610) 252-7301.

Note:

 To expedite assistance, all correspondence or communication MUST include the model number, serial number 

and complete and detailed explanation of the problem.

Before you begin

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If damage is 
found, notify the shipper immediately and contact Follett Corporation so that we can help in the fi ling of a claim, if necessary.

Check your paperwork to determine which model you have. Follett model numbers are designed to provide information 
about the type and capacity of Follett equipment. Following is an explanation of the different model numbers in the 
400 series.

 Important 

cautions

Moving parts. Do not operate with front cover removed.

Hot parts. Do not operate with cover removed.

To reduce risk of shock disconnect power before servicing.

Most ice machine cleaners contain citric or phosphoric acid, which can cause skin irritation. Read caution label 
on product and follow instructions carefully.

Ice is slippery. Maintain counters and fl oors around dispenser in a clean and ice-free condition.

Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.

!

MCC400ABT

S – RIDE
T – top-mount
M – Marine RIDE model

Configuration

V – Vision
B – Bin
H – Harmony

Application

Nugget ice machine
 

MCC – 220V 60Hz Maestro

 Ice machine

 

MCE – 230V 50Hz Maestro Ice machine

 

CR – 220V 60Hz - RIDE model installation, Symphony

 ice and water dispenser

 

ER – 230V 50Hz - RIDE model installation, Symphony ice and water dispenser

 

CD – 220V 60Hz - Replacement Ice machine, Symphony ice and water dispenser

 

ED – 230V 50Hz - Replacement Ice machine, Symphony ice and water dispenser

Flake icemaker
 

MFE – 230V 50Hz - Top installation, Follett ice storage bin

Ice Machine Series

400 – 400 lbs (181kg)/day, R404A

Ice machine capacity and refrigerant

A – air-cooled
W – water-cooled

Condenser type

Содержание C/ER400A/W













































Отзывы: