Follett 00170688, Руководство по установке

Страница: 5 / 8

Keypad Lock Retrofit Kit 5
20. Hold keypad housing close to mounting base while
folding excess wire inside housing. Position wire
away from spring clips that hold keypad housing to
base
(Fig. 10) .
21.
Place keypad housing over base and push firmly
until housing snaps into place. Keep wires away from
spring clips while pushing to avoid damage to wires.
22.
Enter code 1 2 3 4 5 6 # on keypad and verify that
slip bolt on lock mechanism retracts.
Fig. 10
Mounting latch
1. Close door and transfer centerline mark from door to
top jam of refrigerator
(Fig. 11) .
Fig. 11
2. Position jig 2 with 3-hole side against refrigerator
ceiling, matching slot in jig with centerline mark
(Fig. 12) .
Note: Be sure to use the correct jig for REF1/2 or REF4/5.
3.
Mark 3 holes on refrigerator ceiling through jig.
4. Remove jig.
5. Center punch holes and drill with .136 (#29) drill bit.
Warning: Do NOT drill through refrigerator top.
6. Tape holes with 8-32 tap.
Fig. 12