Follett 00170688, Руководство по установке

Страница: 3 / 8

Keypad Lock Retrofit Kit 3
4. Position lock mechanism in jig cutout on door back.
Thread wire cable connector through jig
(Fig. 4) .
Fig. 4
5. Mark 4 holes onto door back through lock (Fig. 5) .
6.
Remove lock mechanism.
Fig. 5
7. Reverse jig on door, aligning slot in jig with centerline
mark. Mark center hole on back on door
(Fig. 6) .
8.
Center punch all marked holes.
9.
Drill all holes with .136 (#29) drill bit.
Warning: Do NOT drill completely through door.
Fig. 6