0
FASTBACK P-21 FOILFAST PRINTER USER’S MANUAL, L4079 Rev. B
TROUBLESHOOTING
Problems
Solution
Paper is not feeding correctly or not ejecting
correctly from the sheet feeder
The cover material you are using may not be compatible
with the Foilfast printer.
A curled sheet will cause sheet jams. The sheet should be
curled the opposite way to flatten it out before it is used.
Sheets with folded or cut corners can cause problems if the
sheet does not activate the position sensor and sheet length
sensor properly.
Set the feed guide so that there is approximately 0.02”
between it and the sheets themselves.
The sheet feeder can hold up to 10 composition covers, 1
Clear Cover, or 1 Foilfast Title Sheet.
Composition covers should be between 16 – 18.5 points
thick (.0016 – .00185 inches). Clear covers should be
between 6.5 – 7.5 points thick (.0065 – .0075 inches).
Covers that fall outside the bounds of these thickness ranges
may work in the Foilfast printer, but Powis Parker does not
recommend using them. Covers that fall substantially beyond
these thickness ranges may damage the printer’s feeding
mechanism and may void your warranty.
Make sure nothing is on the output tray as this can cause
sheet jams.
Sheets must fanned at least once before they are loaded
into the sheet feeder. If not, sheets may stick to one
another, and cause multiple sheets to feed into the printer
at one time, or other forms of misfeeding.
IX
