Fogo Montanha E601, Инструкция по эксплуатации

Страница: 27 / 65

27
Figure 30 – Ventilation kit models E601 / E701 / E 801 / E901
b) On the following models "E609, E609 H, E709, E809 e E909" the ventilation kit is not installed in the equipment
but must be purchased separately.
In these models the ventilation kit is attached underneath the equipment, as shown in Figure 31, for this reason it
is mandatory that the equipment is placed in a masonry built for this purpose or to acquire a table suitable for the
corresponding equipment model, so that the equipment is placed and raised to allow the coupling of the ventila-
tion kit underneath.
Figure 31 – Ventilation kit models E609 /E609 H / E709 / E 809 / E909
The ventilation kit connection is made by 4 screws that go in the ventilation kit assembly. Before fixing the ventila-
tion kit it is necessary to break the micro joint of the galvanised part as shown in Figure 32.
Figure 32 – Micro-joint to break
The fan button and microswitch, are placed on the part indicated as shown in Figure 33.