Foerster HygieneBox Basic, Оригинальное руководство по эксплуатации

Страница: 42 / 47

42 Appendix
11. Appendix
11.1 Checklist for commissioning and recommissioning
Note: You must carefully read the instructions in the operating manual, in particular the safety
instructions, and observe them before putting the HygieneBox into service.
11.2 Materials list
The materials used in the HygieneBox include:
• Nickel-plated brass
• Brass
• Vulcanized fiber, graphite-loaded
• V2A, V4A
• Plastics: PTFE (Teflon), TPE, PVC, NR (natural rubber)
• Silicone
• Rubber: NBR
Commissioning OK?
Inform the end users that the HygieneBox is to be installed so that it is protected against
rain and moisture.
Inform the end users that the feeder and cables must be protected against exposure to
sunlight.
Install the discharge tray.
Connect hoses to the cleaning valve.
Mount the cleaning valve and connect the hoses.
Mount the HygieneBox/HygieneBox Teat lock.
Connect the power cable to the cleaning valve.
Attach the teats.
Connect the suction hose and return hose.
Connect the pressure reducer.
Connect the water hose.
Connect the antennas.
Mount and connect the ball valve.
Create the registration of the stations in the setup for the automatic feeder.
Activate the training function
Activate teat cleaning.
Perform cleaning.