manualshive.com logo in svg

Focusrite Rednet A16R, Руководство пользователя

Поделиться
Скачать
Focusrite Rednet A16R Скачать руководство пользователя страница 11

11

ReDnet A8R/A16R oPeRAtIon

first Use and firmware Updates

Your RedNet A8R/A16R may require a firmware update* when it is first installed and switched on. 
Firmware updates are initiated and handled automatically by the RedNet Control application. 

*It is important that the firmware update procedure is not interrupted – either by switching off power to the 
RedNet A8R/A16R unit or the computer on which RedNet Control is running, or by disconnecting either from the 
network.

From time to time Focusrite will release RedNet firmware updates within new versions of RedNet 
Control. We recommend keeping all RedNet units up to date with the latest firmware version supplied 
with each new version of RedNet Control.

Digital Clocking

Each RedNet A8R/A16R will automatically lock to a valid Network Master via its Dante connection. 
Alternatively, if a Network Master is not present, then the unit can be chosen as the Network Master 
by the user. 

Pull Up and Pull Down operation

RedNet A8R/A16R is able to operate at a specified pull up or pull down percentage as selected in the 
Dante Controller application.

sample Rate Converters

SRC will need to be switched on if the AES/EBU source is not using the current system clock as a 
reference signal.

Note that engaging the sample rate converter will increase the overall latency of the device.

Содержание Rednet A16R



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды