Focusrite Logic Pro Скачать руководство пользователя страница 13

Страница: 13 / 29

Control Surface Operation

Control 2802 Logic Pro Automation & Control Surface Manual

Accessing Tracks and Parameters

The BANK and 5-8 switches (15 & 16) allow you to bring

different tracks from your DAW session onto the 8 Fader Strips

and 4 rotary encoders.
The switches operate in Logic’s ‘Mixer’ and ‘Arrange’ windows.

BANK (15)

When SHIFT (13) is not selected, the BANK switches (15)

‘bank’ in eight channel blocks left and right. For example, to

control tracks 1-8, then 9-16, then 17-24 and so on.
Enable SHIFT (13), and the BANK switches (15) now ‘nudge’

assignments left or right channel-by-channel. For example, to

control tracks 1-8, then 2-9, then 3-10 and so on.

You can also enable the NUDGE switch (11) and

then turn the jog wheel (8) to nudge up and down

through your tracks more quickly.

On your Logic session window, the 8 tracks assigned to

Control 2802 are marked in light grey (in the track header).
On Control 2802, you will see the name of the 8 assigned

tracks in the encoder OLED displays - those in blue are

currently assigned to the rotary encoders:

5-8 Switch (16)

Press the 5-8 switch (16) to ‘page’ the 4 rotary encoders to the

second set of four tracks:

The encoders can be used to control pan, aux, insert and

input/output assignments for the four active channels. See

page

for details.

Transport Panel

The transport panel provides access to the following functions:

●

Rewind (3)

●

Fast-Forward (4)

●

Stop (5)

●

Play (6)

●

Record (7)

A jog wheel (8) is also provided.

Rewind/Fast-Forward (3 & 4)

Press either switch once to wind at normal speed.
Press the switch again to increase the wind speed.
To exit rewind or fast-forward, press Stop (5) or Play (6).

Stop (5) & Return to Zero

Press once to stop at the current playhead position.
Press again (while in stop) to return to zero. This places the

playhead back at the beginning of the session.

Jog Wheel (8) - Jog/Scrub/Shuttle

Turn the jog wheel clockwise or anticlockwise to move the

playhead forwards or backwards in time; audio playback is

slient in this mode.
Please note that in Logic, the SCRUB switch (12) has no

function. Keep pressing SCRUB to step through these modes

to return the jog wheel to normal operation (SCRUB LED off).
The jog wheel can also be used in conjunction with NUDGE

(11) to change the DAW tracks in access.

Содержание Logic Pro






























Результаты поиска

Содержание Logic Pro

Отзывы:

Похожие инструкции для Logic Pro

Бренды по названию

Популярные бренды

Focusrite Logic Pro, Руководство по управляющим поверхностям

Результаты поиска

Содержание Logic Pro

Отзывы:

Похожие инструкции для Logic Pro

Бренды по названию

Популярные бренды