FocalPoint P23E, Инструкция по установке и эксплуатации

Страница: 5 / 12

UNPACKING TTHE A APPLIANCE
Caution: TThis aappliance iis hheavy. A Always sseek aassistance w whilst uunpacking aand/or dduring iinstallation.
Read all the instructions before continuing to unpack or install this appliance. Carefully remove the appliance
from its packaging and stand on the floor.
Note: DO NOT stand the appliance unfixed with its front facia fitted, as this will be unstable.
Check that the remaining packaging contents correlate with the component checklist below. Please dispose of
all packaging with care at your local recycling centre.
COMPONENT C CHECKLIST
QUANTITY DESCRIPTION
1 Fire Appliance
1 Glass Facia and Four Decorative Corner Colums or Mirror Facia
1 Bag of Decorative Pebbles
1 Instruction Booklet
1 Screw Fixing Pack (3 x 37mm long round head screws and 3 plastic wall plugs)
1 Wall Mounting Template
PREPARING TTHE A APPLIANCE
CAUTION: D DO N NOT cconnect tthe aappliance tto tthe ssupply aat tthis sstage.
1. Place the appliance on a suitable surface and remove the 2 x No 8 Phillips
self tapping screws, retaining the lower lamp cover plate, as shown in figure 1.
Remove the cover plate by sliding towards the top of the appliance and then
easing from its lower retaining slot.
2. Carefully “ease” the white fuel bed from the appliance as shown in
figure 2. Be careful not to damage the spinner or lamp during
removal.
This allows access to the lower fixing position of the rear bracket
attached to the back of the main case assembly. See figure 3
3
6.0
7.0
8.0
Fig 2
©
2007 Focal Point Fires plc.
Fig 1
2 off No 8 fix-
ing screws
Lamp cover
plate
Fig 3
Lower fixing
position