FocalPoint P23E, Инструкция по установке и эксплуатации

Страница: 10 / 12

SERVICING
There aare nno iinternal uuser sserviceable pparts.
Check regularly for security of wall fixings and front facia as appropriate. Also check the security and condition
of the supply cable and connections. If the supply cable becomes damaged, it must be replaced by a service
agent or competent person, such as a qualified electrician.
Fuse R Replacement:
Use an approved fuse to BS 1362 and proceed as follows:
1. Remove the fuse cover (A) and fuse (B). See Fig 10.
2. Fit replacement 13A fuse into fuse cover, and then refit both into plug.
If the fuse cover (A) is missing or lost the plug must not be used until a replacement
is fitted. Replacements are available from your local electrical store
8
As our policy is one of continuous improvement and development, we hope therefore you will understand we must retain the right to amend details and/or specifi-
cations without prior notice.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retail-
er for recycling advice
F860099
The wires in the cable are coloured in accordance with the
following code:
LIVE - BBrown
NEUTRAL - BBlue
EARTH - G Green/Yellow
Fig 110
BBeeffoorree C Caalllliinngg tthhee M Maannuuffaaccttuurreerr
You will be charged for a Service Engineers visit if a problem with your appliance is caused by incorrect
installation, incorrect use, or damage caused by use of ancillary equipment not defined as suitable in this
instruction manual.
©
2007 Focal Point Fires plc.
Please N Note :: Except where otherwise stated, all rights, including copyright
in the text, images and layout of this booklet is owned by Focal Point Fires
plc. You are not permitted to copy or adapt any of the content without the
prior written permission of Focal Point Fires plc.
14.0