©
2021
Focal Point Fires Ltd.
5.0 INSTALLATION
GB IE
STEP
1
To avoid splitting the rear of the suite pre
-
drill the holes.
Then
attach the fixing strap (I) to the rear of the suite using
the 4x
12
mm screws (
E
).
STEP
2
Once the fixing straps are in position, centre and level the suite into its final fitting position. Mark with a pencil on the wall where you
wish to drill. Remove the suite from the position and prepare the wall from the marked positions. If using the fixings supplied, drill a
hole in the wall using a 6mm drill bit. If not, use a suitable drill bit for the wall plugs you are using. Insert the wall plugs into
position
placing
the surround back up into position against the wall. You are now able to secure the surround to the wall using
the 4x3
0
mm screws (F) provided.
15
