Focal Point Elysee Fanflue, Инструкция по установке, обслуживанию и эксплуатации

Страница: 15 / 24

FUEL BED LAYOUT
Place the ceramic burner pad onto the top of the burner as
shown, taking care to ensure it is centralised and pushed
fully against the back location ledge. Check that all of the
holes in the burner top plate are unobscured.
Place the matrix into position as shown. Slide it back to the
rearmost position and centralise.
Locate the two front coal sections into the slot along the
front of the burner tray, ensuring the coal shapes are
facing forwards. The legs of the coals have a serrated front
face which is intended to give a tight interference fit into
the tray, and at the same time chamfer away a portion of
the face.
Do not alter the slot in the tray front, so that the coals
become a loose fit.
Place the front row of six coals as shown onto the
placement pads on the matrix, and further located by the
lugs along the top edge of the front coal strips. Ensure the
rear edges of the coals do not protrude into the flame
ports of the matrix. Pull the coals forward if necessary.
Place the rear row of five coals across the back of the
matrix as shown.
13
9.0