When the (IN-) port is an independent power supply, it can be called a (24V) port,
and it forms an output port pair with the (COM) port
The safety limit voltage of the input terminal cannot be greater
than 30Vpp, and the over limit will damage the equipment
NOTE！！！
All buttons are made of white translucent silicone material. The color LED backlight
is set under the Button, which can make the key surface change color with the
change of function and mode.Give more intuitive status indication
The keys are mainly divided into
【 3-Key area 】 and 【 5-Key area 】, and each key
has multiple functions.Among them, the 【 FN 】 Button and the 【 5-Key area 】 key
have the up/down function and the function marked on the key, which will be
changed according to the state of the 【 FN 】 key and the i
nterface mode.Start-up
defaults to the upshift function
【 FN 】
key state is divided into: default white light state and red light state
【 5-Key area 】
The status is divided into:
Button white light
(Manual setting
mode);
Button green light
(Preset output mode);
Button blue light
(Programming
mode);
No button light
(Conversion mode)
�、BUTTON PANEL INTRODUCTION
Button Function Operation Description:
【 RUN 】
Light: The power on/on output is white light
【 IN 】
Input key: Used to switch the input signal mode in the main
interface;When 【 FN 】 red light is on, click 【 IN 】 to enter the input setting
【 OUT 】
Output key: used to switch the output signal mode on the main
interface.When the 【 FN 】 red light is on, click 【 FN 】 to enter the output setting
【 FN 】
Exit Return key:In the main interface, click 【 FN 】 , it will turn into a red
light to activate the downshift function of other keys (enter different modes,
etc.).In the setting interface, the function of 【 FN 】 is to return
【Main Interface】
: Main display interface
1
2
3
5
4
��
PAGE
Built-in battery: 3000mA large capacity lithium battery
Battery display: Display the current battery
percentage in the upper right corner of the display
Charging interface: Type-C
port
(DC 5V-12V)
State of charge: (Up to 10W)When charging, the
power button will display a red light.When fully
charged, it will automatically stop charging and
display a blue light
【 2.4 】 Power & Charge
【 Bottom Display 】
Power Type-C port
